 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ISOLATED DC/DC CONVERTERS 48V Input 3.3V/60A, 5V/40A, 12V/17A Output 07HB-D0T Series * * * * * * * Isolated High Efficiency High Power Density PRELIMINARY * * * * * * Output Over Voltage Shutdown OCP/SCP Over Temperature Protection Remote On/Off Output Voltage Trim Positive/Negative Remote Sense Excellent Thermal Performance Low Cost Input Under Voltage Lockout Fixed frequency(315KHz) Description The 07HB-D0T Series are isolated DC/DC converters that operate from a nominal 48V source. These units provide up to 200W of output power from a nominal 48V input. These units are designed to be highly efficient and low cost. Features include remote on/off, over current protection and under voltage lockout. These converters are provided in an industry standard half-brick package. Part Selection Output Voltage 12.0V 5.0V 3.3V Input Voltage 48V 48V 48V Max. Output Current 17A 40A 60A Max. Output Power 200W 200W 200W Typical Efficiency 93% 93% 92% Model Number Active High 07HB-D0T120 07HB-D0T050 07HB-D0T033 Model Number Active Low 07HB-D0T12L 07HB-D0T05L 07HB-D0T03L Note: Add "G" suffix at the end of the model number to indicate Tray Packaging. Absolute Maximum Ratings Parameter Input Voltage (continuous) Remote On/Off I/O Isolation Voltage Ambient Temperature Storage Temperature Min -0.3V -0.3V -40C -55C Typ Max 80V 18V 2000V 85C 125C Notes Input Specifications Parameter Input Voltage Input Current (full load) Input Current (no load) Remote Off Input Current Input Reflected Ripple Current (pk-pk) Input Reflected Ripple Current (RMS) I t Inrush Current Transient Turn-on Voltage Threshold Turn-off Voltage Threshold 2 Min 36V 32V 30V Typ 48V 120mA 5mA 20mA 5mA 0.05A s 34V 32V 2 Max 75V 6.4A 180mA 10mA 40mA 10mA 0.1A2s 35V 33V Notes Tested with simulated source impedance of 10uH, 5Hz to 20MHz; use a 100uF/100V electrolytic capacitor with ESR = 1 ohm max. at 200KHz at 25C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 3.3V/60A, 5V/40A, 12V/17A Output Output Specifications Parameter Output Voltage Set Point VO=12.0V VO=5.0V Vo=3.3V Line Regulation VO=12.0V VO=5.0V VO=3.3V Load Regulation VO=12.0V VO=5.0V VO=3.3V Regulation Over Temperature (-40C to +85C) VO=12.0V VO=5.0V VO=3.3V Output Current VO=12.0V VO=5.0V VO=3.3V VO=12.0V VO=5.0V VO=3.3V Short Circuit Surge Transient Ripple and Noise (RMS) VO=12.0V VO=5.0V VO=3.3V Ripple and Noise (pk-pk) VO=12.0V VO=5.0V VO=3.3V Turn on Time Overshoot at Turn on Output Capacitance VO=12.0V VO=5.0V VO=3.3V Transient Response Overshoot 25% ~ 50% Max Load Settling Time Overshoot 50% ~ 25% Max Load Settling Time Overshoot 25% ~ 50% Max Load Settling Time Overshoot 50% ~ 25% Max Load Settling Time Overshoot 25% ~ 50% Max Load Settling Time Overshoot 50% ~ 25% Max Load Settling Time 0uF 0uF 0uF 100mV 100mV 55mV 15mS 0% 200mV 250uS 200mV 250uS 150mV 200uS 150mV 200uS 100mV 200uS 100mV 200uS 150mV 150mV 100mV 30mS 5% 1000uF 10000uF 20000uF 400mV 400uS 400mV 400uS 300mV 300uS 300mV 300uS 200mV 300uS 200mV 300uS 0A 0A 0A 20A 48A 72A 24A 54A 81A 3A2s 25mV 25mV 15mV 17A 40A 60A 28A 60A 90A 5A2s 50mV 50mV 30mV Test conditions: 0-20MHz BW, with a 1uF ceramic capacitor and a 10uF Tantalum capacitor at the output. Min 11.820V 4.925V 3.250V Typ 12.0V 5.0V 3.3V 12mV 5mV 3mV 30mV 10mV 7mV 60mV 45mV 30mV Max 12.180V 5.075V 3.350V 24mV 10mV 7mV 60mV 20mV 15mV 100mV 75mV 50mV Notes Vin=48V, Io=50% full load, Ta=25C. - Current Limit Threshold VO=12.0V VO=5.0V Test conditions: di/dt = 0.1A/uS, Vin=48V, Ta=25C with a 1uF ceramic capacitor and a 10uF Tantalum capacitor at the output. VO=3.3V Note: All specifications are typical at nominal input, full load at 25C unless noted. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 3.3V/60A, 5V/40A, 12V/17A Output General Specifications Parameter Efficiency VO=12.0V VO=5.0V VO=3.3V Switching Frequency Isolation capacitance Output Voltage Trim Range Over Temperature Protection Over Voltage Protection MTBF Dimensions Inches millimeters Weight 2.28 x 2.4 x 0.42 57.51 x 60.98 x 10.67 76g 90% 90% 89% 280KHz 80%Vo 117%Vo 93% 93% 92% 315KHz 1500pF 125C 122%Vo TBD 350KHz 110%Vo 127%Vo Vin=48V, full load , Ta=25C Min Typ Max Notes Calculated Per Bell Core TR-332 (IO = Nominal; Ta = 25C) Control Specifications Parameter Remote On/Off Signal Low (Unit On) Signal High (Unit Off) Signal Low (Unit Off) Signal High (Unit On) Current Sink Active Low Active High -0.3V 2.4V -0.3V 2.4V 0mA 0.8V 18V 0.8V 18V 0.75mA 07HB-D0TxxL. The remote on/off pin open, Unit on. 07HB-D0Txx0. The remote on/off pin open, Unit on. Min Typ Max Notes Output Trim Equations Equations for calculating the trim resistor (in k) are shown below. The Trim Down resistor should be connected between the Trim pin and Ground pin. The Trim Up resistor should be connected between the Trim pin and the Vout. Only one of the resistors should be used for any given application. Rtrimdown = 100 - 2[k] delta Module Vout Trim GND Rtrimdown Rtrimup = Notes: (100 + delta) Vo - 122.5 - 2[k] 1.225 delta Module Vout Trim GND Rtrimup delta = (Vo _ req - Vo ) x100[%] Vo Vo_req=Desired(trimmed) output voltage[V] Output voltage Vo=3.308V for 3.3V output; Vo=5.000V for 5.0V; Vo=12.000V for 12V output Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 3.3V/60A, 5V/40A, 12V/17A Output Efficiency Data 94% 92% 90% 88% 86% 84% 82% 80% 78% 76% 74% 72% 70% 5 10 15 20 25 30 35 40 45 50 55 60 OUTPUT CURRENT (A) EFFICIENCY 36V 48V 75V Vo=3.3V Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com ISOLATED DC/DC CONVERTERS 48V Input 3.3V/60A, 5V/40A, 12V/17A Output Pin Connections pin# 1 2 3 4 5 6 7 8 9 10 11 function -Input N/A On/Off +Input +Output +Output +Sense Trim -Sense -Output -Output 0.04" 0.04" 0.08" 0.08" 0.04" 0.04" 0.04" 0.08" 0.08" pin size 0.04" (c)2004 Bel Fuse Inc. Specifications subject to change without notice. 110404 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com |
Price & Availability of 07HB-D0T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |